Product News

The latest evolution of the leading intelli-flav seasoning range, the tna intelli-flav OMS 5, offers consistent coverage and flavour for both wet and dry seasoning. Fully integrated with both oil spray and flavour injection systems, the new OMS provides total control of adhesion and fast flavour changes for snack lines. It features a responsive variable mass seasoning system with dynamic vibratory weigher to directly control oil spray and powder flow into the drum. This enables an accurate, proportional amount of seasoning to be evenly applied to the product for improved coverage and flavour dispersion. Further performance benefits are realised through the enhanced position of the scarfplate on the tna intelli-flav OMS 5 infeed. Mounted to the edge of the drum, the scarf better directs the product into the spraying and flavouring area, providing high quality seasoning performance. Additionally, the newly designed scalloped infeed conveyor allows more product to enter the seasoning drum, while also helping to control product direction for greater accuracy and reduced waste. With a simple, modular design, the intelli-flav OMS 5 is fully enclosed for increased levels of hygiene and ease of cleaning. Moreover, a new pivoting drum improves accessibility for hard to reach areas, simplifying day-to-day operations.                

PIC CAP The new L.E.D flexible map reading light can now plug directly vehicle accessory outlets.   The L.E.D map reading light can now be directly plugged into a vehicle’s accessory outlet, making it more versatile and easy to use. A version features an accessory plug at the end of its 250mm flexible arm that plugs into power outlets commonly found around many vehicles, from trucks and cars to motor homes, caravans and even boats. The new lamp has all the features of the earlier fixed position multi-voltage 9-33V lamp, with its stylish design and powerful 1W L.E.D light, thus making it ideal for passengers to check a map whilst the vehicle is on the move at night, as well as relaxing at the end of the day reading a book or just helping to shed more light over the interior. The light output provided is a crisp clear light, which is designed to ease eye strain when reading and the flexible arm enables quick and easy light adjustment. To activate, it is equipped with an integrated on/off switch built into the lens. The light has an ultra-low current draw of just 0.18A at 12V, is attractively packaged in a stylish blister pack and carries a 5-year L.E.D Warranty.    

 Six EX Series full electric injection moulding machines are manufacturing medical infusion equipment, i.e. three-way stopcocks and large volume syringes. Close to 1 billion injection-moulded parts leave the B.Braun production lines each year under very stringent quality specifications, as most of the parts are used directly on the human body. The company manufacture around 100 million syringes and 150 million three-way stopcock bank products each year. There are 200 product variations of the stopcocks which makes mass production difficult. However Krauss Maffei and B.Braun have overcome this obstacle by placing injection moulding machines in cleanrooms that are directly linked to the assembly and packaging units that operate with minimal manual intervention. The EX Series Injection Moulding machines with 80 ton clamping force were chosen for their precision reliability and longevity, as the long term use of machinery is of key important to B.Braun. The machines are designed specifically for complex mouldings and offer maximum dynamics and precision. They have precise platen control and coupled with the metering accuracy of the all-electric plasticizing unit The mold cavities can be filled precisely eliminating flash, which is an issue in the mass production of medical goods, given the high cavitations and corresponding shot weights. The EX CleanForm systems have the unique feature of excellent accessibility of all machine areas for obligatory cleaning cycles. A closed oil lubrication system supplies the pivot points of the Z toggles and prevents lubricants from leaking. The production cell is virtually without particle or thermal emissions and potential sources of impurity are eliminated as the platen pivot points are completely encapsulated and tie-bars are no longer required as guides for the moving platen. B.Braun has just placed an order for an additional two EX machines as well as two larger hybrid machines with 320 ton clamping force.  

A new line of ultrasonic thickness gauges now includes the Sonagage IV, T-Gage V, Microgage III and Steelgage II. The Sonagage IV is a straight-forward gauge for corrosion applications & can measure metal loss within a range of 1mm-500mm to an accuracy of +/- 0.1mm. Ideal for operators testing a few different materials, the Sonagage IV has 8 set-ups for common materials & 2 custom set-ups. Also for corrosion assessment is the T-Gage V series, which comes with monochrome display as standard. All models can be ordered with a colour TFT display. Simple in-field upgrade options, for such features as data logging (with Data XLS software) & A-Scan/B-Scan displays are also available throughout the life of upgradeable models. The T-Gage V comes in three standard models. The T-Gage V-B has a variable velocity facility to allow a wider range of materials to be measured. The T-Gage V is a mid-range model which offers the most popular features including echoÐto-echo for ignoring coatings, alarms & ÒTransducer attendantÓ which notifies the user when it is time to replace the transducer. The T-Gage V (CDLW) is the top of the line model offering all the features of the T-Gage V, plus colour, waveform and data logger, allowing storage of up to 100,000 readings. A powerful feature & unique in its class is the B-Scan which allows up to 20 thickness readings per second to be displayed in a cross-sectional view & stored for future reporting. The Microgage III is ideal for precision applications which require greater accuracy & capability. The Microgage III is available in 7 different configurations including basic, datalogging, with & without waveform in colour or monochrome. All gauges weigh only 230 g & have a battery life of up to 200 hours. They come with a limited 2 year warranty, […]

Intelli-FlavOMS 5 is for ultimate flexibility in on-machine seasoning (OMS) applications. The latest evolution of the leading intelli-flav seasoning range, the tna intelli-flav OMS 5 offers consistent coverage and flavour for both wet and dry seasoning. Fully integrated with both oil spray and flavour injection systems, the new OMS provides total control of adhesion and fast flavour changes for snack lines.  It features a responsive variable mass seasoning system with dynamic vibratory weigher to directly control oil spray and powder flow into the drum. This enables an accurate, proportional amount of seasoning to be evenly applied to the product for improved coverage and flavour dispersion.  Further performance benefits are realised through the enhanced position of the scarfplate on the tna intelli-flav OMS 5 infeed. Mounted to the edge of the drum, the scarf better directs the product into the spraying and flavouring area, providing high quality seasoning performance. Additionally, the newly designed scalloped infeed conveyor allows more product to enter the seasoning drum, while also helping to control product direction for greater accuracy and reduced waste. With a simple, modular design, the intelli-flav OMS 5 is fully enclosed for increased levels of hygiene and ease of cleaning. Moreover, a new pivoting drum improves accessibility for hard to reach areas, simplifying day-to-day operations.              

X4 is a new multi-edged, tangential tool for parting off and grooving of small components. Available in cutting widths from 0.5 Ð 3.0 mm (.031ÕÕ Ð .093), X4’s inserts minimise material consumption in parting off and enable precise grooving and copying of small and medium-sized, complex parts. Performance is further enhanced through X4’s tangential insert bodies that ensure high rigidity, stability and productivity. To increase flexibility, every specific X4 insert seat can accommodate all X4 insert types, allowing for reduction of tooling inventory. Depending on the cutting edge width, the tool’s maximum cutting depth ranges from 2.6 – 6.5 mm (.102  .256) and can cut off maximum bar diameters from 5.2 – 13 mm (.205 Ð .512). X4 inserts are available in neutral, right-hand angled and left-hand angled cutting edge options. Ideal for a wide variety of common workpiece materials, X4 uses CP500 and CP600 insert grades. CP600 features a mix of toughness and wear resistance suitable for most general applications, while CP500 provides increased wear resistance for more challenging applications. To further increase X4’s performance, inserts with the MC chipbreaking geometry can be applied. This versatile geometry achieves excellent formation of comma and clock-spring chips in a variety of materials and uses a straight front edge line to guarantee a straight bottom within a groove. All toolholders provide the unique Jetstream Tooling Duo technology to further enhance productivity, lengthen tool life and improve chip control. By delivering coolant from two outlets to optimal points in the cutting and heat zones, Jetstream Tooling Duo contributes to efficient cooling, improved chip control and high part quality. X4 will be offered in shank sizes metric 2020 and 2525, imperial sizes .63, .75 and 1.00, and Seco-Capto C4, C5 and C6.          

A comprehensive range of Free-Form Headlamp conversion kits allow owners to upgrade the lighting on their work vehicles, or for use in new applications. Free-Form technology utilises a specially designed and complex reflector to precisely control the light. In each case, the reflector has an important relationship with the globe filament to maximise the light output and pattern of light on the road. Because of the precise design of the reflectors within each headlamp unit it is critical to the lamps performance that only  approved globes are used. The new range of Free-Form Headlamp conversion kits covers all popular round and rectangular sizes used in many vehicles, from utes and SUVs to trucks and buses. The smaller round and rectangular lamps are each fitted with a glass lens with no optic function itself. Larger rectangular units such as the 200 x 142mm and the 7 round headlamp inserts each have virtually unbreakable polycarbonate lenses, which effectively reduce the weight and add to the durability and active life of the lamp. The full range of these stylish and attractive headlamp inserts includes High and High/Low beam functions and incorporates the popular 7 (178mm) and 5  (146mm) round, plus the all new 165 x100mm and 200 x 142mm rectangular units. Each headlamp insert is ADR approved and is ideally suited to upgrade applications in popular vehicles or fitted as original equipment or upgrades in buses, trucks and special vehicles.        

A comprehensive range of Free-Form Headlamp conversion kits allow owners to upgrade the lighting on their work vehicles, or for use in new applications. Free-Form technology utilises a specially designed and complex reflector to precisely control the light. In each case, the reflector has an important relationship with the globe filament to maximise the light output and pattern of light on the road. Because of the precise design of the reflectors within each headlamp unit it is critical to the lamps performance that only E approved globes are used. The new range of Free-Form Headlamp conversion kits covers all popular round and rectangular sizes used in many vehicles, from utes and SUVs to trucks and buses. The smaller round and rectangular lamps are each fitted with a glass lens with no optic function itself. Larger rectangular units such as the 200 x 142mm and the 7 round headlamp inserts each have virtually unbreakable polycarbonate lenses, which effectively reduce the weight and add to the durability and active life of the lamp. The full range of these stylish and attractive headlamp inserts includes High and High/Low beam functions and incorporates the popular 7 (178mm) and 5  (146mm) round, plus the all new 165 x100mm and 200 x 142mm rectangular units. Each headlamp insert is ADR approved and is ideally suited to upgrade applications in popular vehicles or fitted as original equipment or upgrades in buses, trucks and special vehicles.  

X4 is a new multi-edged, tangential tool for parting off and grooving of small components. Available in cutting widths from 0.5 – 3.0 mm (.031 – .093), X4’s inserts minimise material consumption in parting off and enable precise grooving and copying of small and medium-sized, complex parts. Performance is further enhanced through X4’s tangential insert bodies that ensure high rigidity, stability and productivity. To increase flexibility, every specific X4 insert seat can accommodate all X4 insert types, allowing for reduction of tooling inventory. Depending on the cutting edge width, the tool’s maximum cutting depth ranges from 2.6 – 6.5 mm (.102 – .256) and can cut off maximum bar diameters from 5.2 – 13 mm (.205 – .512). X4 inserts are available in neutral, right-hand angled and left-hand angled cutting edge options. Ideal for a wide variety of common workpiece materials, X4 uses CP500 and CP600 insert grades. CP600 features a mix of toughness and wear resistance suitable for most general applications, while CP500 provides increased wear resistance for more challenging applications. To further increase X4’s performance, inserts with the MC chipbreaking geometry can be applied. This versatile geometry achieves excellent formation of comma and clock-spring chips in a variety of materials and uses a straight front edge line to guarantee a straight bottom within a groove. All toolholders provide the unique Jetstream Tooling Duo technology to further enhance productivity, lengthen tool life and improve chip control. By delivering coolant from two outlets to optimal points in the cutting and heat zones, Jetstream Tooling Duo contributes to efficient cooling, improved chip control and high part quality. X4 is offered in shank sizes metric 2020 and 2525, imperial sizes .63, .75 and 1.00, and Seco-Capto C4, C5 and C6.  

New low profile L.E.D strip lamps have been specially styled to complement modern caravan and motorhome interiors. Featuring the latest SMD L.E.D technology, the interior lamps deliver a smooth, yet powerful light output. Ensuring complete versatility, the lamps are supplied with three interchangeable end caps, allowing them to be surface or corner mounted for a neat, unobtrusive finish. Multiple lamps can also be interconnected to create continuous lengths of lighting, adding elegance with a professional touch to the interior of a caravan or motorhome. All lamps are fully sealed to IP66 rating and each draws ultra-low current of 0.09A at 12V or 0.05A at 24V and 0.15A at 12V or 0.07 at 24V. The strip lamps come in 150mm and 300mm lengths in both 12 Volt and 12/24 Volt.